Highland HP 90 Degree Gauge Adapter

The Highland 90-Degree Gauge Adapter positions a compatible XS Scuba Mini Tech pressure gauge at a right angle to a high-pressure hose. This configuration can make a compact gauge easier to route and read while reducing the amount of rigid hardware projecting straight from the hose end.

The adapter includes the required air spool with Viton O-rings and is designed specifically for the Mini Tech gauge and a compatible high-pressure hose. It is an accessory component and is not included with the Mini Tech Gauge Kit.

• Mounts a compatible Mini Tech gauge to a high-pressure hose
• Positions the gauge 90 degrees to the hose
• Air spool with Viton O-rings included
• Adapter is sold separately from the Mini Tech Gauge Kit
• XS Scuba part number HL403-90

High-pressure fittings are life-support components. Confirm gauge and hose compatibility, keep sealing surfaces clean, and have the adapter installed and pressure-tested by a qualified technician. Inspect for leakage or damage before each dive and never loosen the assembly while it is pressurized.