DRYFOB Waterproof Car Key Container

The original DRYFOB waterproof container lets shore divers carry a compatible electronic car key instead of leaving it hidden near the vehicle. Its anodized aluminum shell, deep threaded closure, and dual O-ring seal protect the interior from water, humidity, sand, and mud to a manufacturer-rated depth of 1,200 feet.

The 3.75 x 1.65-inch interior is sized for many standard key fobs, and the container is designed to be close to neutral when loaded with a typical key. Two attachment points accept an appropriate lanyard, bungee, or bolt snap, while the aluminum body also blocks the key fob's radio signal.

• IPX8 certified to 1,200 ft / 365 m
• Interior cavity: 3.75 in long x 1.65 in diameter / 95 x 42 mm
• Overall height: 4.33 in / 110 mm
• Outer width: 2.0 in top and 1.85 in bottom / 50 and 46 mm
• Empty weight: approximately 3.7 oz / 104 g
• Approximate positive buoyancy when empty: 2.3 oz / 65 g
• Near-neutral buoyancy with many standard key fobs
• Corrosion-resistant anodized aluminum body
• Dual O-ring sealing system
• Signal-blocking Faraday-cage construction
• Two attachment points; attachment hardware sold separately
• Manufacturer lists red and blue standard colors
• Silicone lubricant and spare O-rings included

Measure the key fob before ordering and make sure it does not interfere with the sealing surfaces. Before every dive, confirm both O-rings are installed, clean, undamaged, and lightly lubricated; close the threads completely, secure the container independently, and rinse and air-dry it after saltwater use.