Trident TA54 Hex Rim Tank Boot for Aluminum 100 Tanks, 8in Diameter

The Trident TA54 Hex-Rim Tank Boot helps an 8-inch-diameter, flat-bottom aluminum 100 scuba cylinder stand upright while protecting decks, pool tile and the cylinder's lower finish. Its molded plastic construction absorbs normal handling impacts, and the hex-shaped outer rim helps reduce rolling when the cylinder is placed on its side.

Self-draining openings allow trapped water to escape, reducing the chance that moisture will remain hidden between the boot and cylinder after a dive. The boot is approximately 3.5 inches high from its inside bottom to the top edge.

• For 8-inch flat-bottom aluminum cylinders
• Hex rim helps limit rolling
• Self-draining molded construction
• Trident model TA54

Fit and handling note: Confirm the cylinder's measured outside diameter and bottom profile before ordering. A tank boot is not a securing device—always restrain cylinders during storage and transport, and remove the boot periodically to rinse, dry and inspect the cylinder underneath.